VARMO TECK 23
Thermoformed panel with reduced thickness
Low-thickness panels are radiant systems designed to reduce the overall thickness of the floor, allowing the desired temperature to be reached quickly thanks to their low thermal inertia. This type of system is ideal for renovations or in situations with height constraints, integrating pipes and insulating panels for a more compact end result than traditional systems.
VARMO TECK23 panels allow the system to be installed in a thickness of only 33 mm with anchored panels or 43 mm with non-anchored panels.
Documentation
Technical features
Description
VARMO TECK 23 is the radiant panel for underfloor heating and cooling systems designed for renovations when there are height problems to fit a traditional underfloor system.
It is made of white EPS sintered expanded polystyrene, laminated with a black HIPS thermoformed polystyrene laminate film with a thickness of 650 μm, which can be used with 16 and 17 mm diameter pipes.
It complies with the regulations in force regarding thermal insulation and with UNI EN 13163 of 2009 and UNI EN 1264-4 standards; it has CE marking.
Combined with a self-levelling screed, it allows a new system to be created in just 3-4 cm, unlike traditional systems that require at least 8-9 cm.
It can be used in public and private environments, in dry places and in environments with a risk of humidity, such as bathrooms and kitchens.
If a self-levelling screed is used, VARMO TECK has a very low inertia, which allows very precise thermoregulation and fast set-up, resulting in savings in operating costs due to lower energy consumption.
Recommendations: the panel must always be protected from direct sunlight and stored in a dry, ventilated place, away from heat sources and open flames.
It is made of white EPS sintered expanded polystyrene, laminated with a black HIPS thermoformed polystyrene laminate film with a thickness of 650 μm, which can be used with 16 and 17 mm diameter pipes.
It complies with the regulations in force regarding thermal insulation and with UNI EN 13163 of 2009 and UNI EN 1264-4 standards; it has CE marking.
Combined with a self-levelling screed, it allows a new system to be created in just 3-4 cm, unlike traditional systems that require at least 8-9 cm.
It can be used in public and private environments, in dry places and in environments with a risk of humidity, such as bathrooms and kitchens.
If a self-levelling screed is used, VARMO TECK has a very low inertia, which allows very precise thermoregulation and fast set-up, resulting in savings in operating costs due to lower energy consumption.
Recommendations: the panel must always be protected from direct sunlight and stored in a dry, ventilated place, away from heat sources and open flames.
Benefits
- Reduced footprint: installation possible in just 43 mm (self-levelling screed)
- Reduced masonry work: VARMO TECK 23 can be laid directly on old floors, avoiding costly demolition and disposal work
- Speed of laying: the special design of the bosses allows for practical and fast laying; in fact, no clips are required to hold the pipe in place
- Energy saving
- No limitation in the choice of coatings
- Ideal for renovations
- Can also be laid diagonally at 45°
Applications
Documentation
Technical data sheets
Product range
You may also be interested in
VARMO TECK 0
VARMO TECK0 panels allow for the creation of an underfloor heating system with self-levelling screed in just 22 mm. The...
