VARMO DRY
Fiber plaster panel
VARMO DRY panels are used for ‘dry’ radiant heating/cooling systems, as they do not require the installation of a screed. VARMO DRY offers quick installation, reduced thickness, and a lightweight system that is also ideal for renovations where space is limited. VARMO DRY allows you to create a system with a thickness of only 22 mm. The system involves laying fibre-reinforced gypsum boards on which the pipes are housed, which are then covered with the final coating.
Documentation
Technical features
Description
VARMO DRY is an innovatibe system that allows floor heating to be realised in just 2 cm (excluding covering), and meets space requirements especially in renovations.
This solution is called 'dry' because no concrete screed is made.
Traces have been obtained on the panels to insert a small diameter pipe (11.6 or 12 mm), which guarantees a low thermal inertia
A warning before installing VARMO DRY is to have a smooth support surface.
In case of renovations of existing homes it is recommended to fix the panels directly on the existing flooring.
It is advisable to keep the pipe housing tracks clean.
Recommendations: the panel must always be protected from direct sunlight and stored in a dry, ventilated place, away from heat sources and open flames.
This solution is called 'dry' because no concrete screed is made.
Traces have been obtained on the panels to insert a small diameter pipe (11.6 or 12 mm), which guarantees a low thermal inertia
A warning before installing VARMO DRY is to have a smooth support surface.
In case of renovations of existing homes it is recommended to fix the panels directly on the existing flooring.
It is advisable to keep the pipe housing tracks clean.
Recommendations: the panel must always be protected from direct sunlight and stored in a dry, ventilated place, away from heat sources and open flames.
Benefits
- Reduced encumbrances : installations can be realised in just 2 centimetres (excluding flooring)
- Can be laid on pre-existing floors
- Quick and easy to install: no screed required
- Low thermal inertia: temperature is reached in a very short time
- No limitations on the choice of floor coverings
- Ideal for renovations
